Page Comparison

...

1. From the Home Screen, select either English or Espanol.
   
2. Select the Credit/Debit icon in in the right top corner of the screen.
   
3. Enter the amount you wish to add to the card.
4. Click Submit.
   
5. Clicking "Submit" will direct you to follow the credit card bezel prompts to complete the process.
   
6. Click the yellow Start button on the bezel to approve the amount.  Click the red Stop button to cancel the transaction.
   
7. When prompted, insert your card, chip first, facing you.  
   
8. When processing, you'll notice the type of card described on the bezel as well as prompting to not remove the card.
   
9. Wait until the card system is finished processing the transaction.
10. Once the system prompts to remove the card, it's safe to remove it.
    
11. Once the transaction is approved, select Print Receipt and Continue, or Continue without Receipt.
    
12. The transaction is complete and the newly added amount will appear on the card balance screen on the X-Changer.

Get A New Card Using A PRE-PAID Card

In some locations where a credit card can be used to purchase a new card, it is also possible to use a PRE-PAID card. If this feature is available, then you will see an option on the screen that you may select to use a credit card/debit card. Once this option is selected, you will be guided through swiping or inserting the pre-paid card on the credit card bezel. A receipt may be available from a remote printer in the store.  See the store attendant for the location of the receipt printer, or follow the onscreen instructions.  Follow the instructions below to use a pre-paid card.

1. From the Home Screen, select either English or Espanol.
   Image Added
2. Select Get a new card 
   Image Added
3. Select the Credit/Debit icon in in the right top corner of the screen.
   Image Added
4. Enter the amount you wish to add to the card.
   Image Added
5. Click Submit.
6. Follow the instructions on the card reader.
   Image Added
7. Select the Yellow Start Button to approve the amount.
   Image Added
8. The bezel will instruct to Insert/Swipe Card.
   Image Added
9. Processing the transaction will occur.
   Image Added
10. The amount will be approved.
    Image Added
11. The amount will be approved and added to the balance of the card.
    Image Added
12. The value of $1.00 was added to the LaundryCard to have a balance of $3.00.
    Image Added