Versions Compared

Old Version 16

changes.mady.by.user Former user

Saved on

compared with

New Version 17

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

C-0103-B

Multiexcerpt
MultiExcerptNameC-0103-B

This document assumes the installer has a working knowledge of hand tools and of the target machine in question.  It is recommended that instructions herein be performed by individuals who are qualified to perform these tasks.  CCI takes no responsibility for the accuracy of this document, or for any damage that may occur to the target machine.

This document assumes the following items have been acquired and are not a part of the installation kit.

80C-0103-BHeightfalsefalse

LC Tools

Multiexcerpt
MultiExcerptNameLC Tools
  • Various Cat5 cables
    • If terminating cables, include Cat5 RJ-45 stripper/crimper
  • Cat5/RJ-45 line tester
  • 3/32 allen key (card reader screws)
  • Philips Screwdriver w/ multiple bits
  • Flathead Screwdriver
  • Standard socket set
  • Utility Knife
  • Cable/Zip Ties
 

Ports

Multiexcerpt
MultiExcerptNameports
 

LaundryCard Reader Ports

Overview

Multiexcerpt
MultiExcerptNameOverview
This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found . This guide further assumes that all relevant Cat5 cables have been run to the point of connection for the LaundryCard reader being installed. Further information regarding cabling can be found in the .
 

Warnings

Multiexcerpt
MultiExcerptNamewarnings
mediumwarning

Confirm machine power is disconnected before beginning installation!

mediumwarning

Use caution and appropriate protection to prevent hand and eye injury during installation!