Versions Compared

Old Version 39

changes.mady.by.user Former user

Saved on

compared with

New Version 40

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Multiexcerpt
MultiExcerptNameInstall Header
mediumnote

This document assumes the installer has working knowledge of hand tools and of the target machine in question. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks.

Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

C-0103-Bfalsefalse

LC Tools

Multiexcerpt
MultiExcerptNameLC Tools
  • Various Cat5 cables
    • If terminating cables, include Cat5 RJ-45 stripper/crimper
  • Cat5/RJ-45 line tester
  • 3/32 allen key (card reader screws)
  • Philips Screwdriver w/ multiple bits
  • Flathead Screwdriver
  • Standard socket set
  • Utility Knife
  • Cable/Zip Ties

...

Multiexcerpt
MultiExcerptNamewarnings
mediumwarning

Confirm machine power is disconnected before beginning installation!

mediumwarning

Use caution and appropriate protection to prevent hand and eye injury during installation!

Additional Information

Multiexcerpt
MultiExcerptNameAdditional Information
trueINLINE

Additional Information

Unverified

Multiexcerpt
MultiExcerptNameUnverified
largewarning

These instructions and kit hardware have not been verified or tested by Card Concepts Inc. and are used at the installers own risk.