Versions Compared

Old Version 24

changes.mady.by.user Former user

Saved on

compared with

New Version 25

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Multiexcerpt
MultiExcerptNameInstall Header
mediumnote

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

C-5001falsefalse

 

Reader Ports

Multiexcerpt
MultiExcerptNameReader ports

 

...

Multiexcerpt
MultiExcerptNameAdditional Info
trueINLINE

Additional Information

Unverified

Multiexcerpt
MultiExcerptNameUnverified
largewarning

These instructions and kit hardware have not been verified or tested by Card Concepts Inc. and are used at the installers own risk.

ACA Dip Switches

Multiexcerpt
MultiExcerptNameACA Dip Switches

ACA machines using a serial configuration require dip switch 3 on the Machine Control Assembly to be set to the 'ON' position. All other dip switches should remain in the 'OFF' position.

...