| Section | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Required Hardware
| Multiexcerpt include | ||||
|---|---|---|---|---|
|
Additional Hardware
| Bw part list | ||||||
|---|---|---|---|---|---|---|
|
The completion of this guide requires a flat mount bezel similar to the one listed above. Actual bezel may vary- consult appropriate kit information or contact Technical Support for individual part information.
Required Tools and Supplies (Not Included)
- Needle nose pliers
- Phillips head screw driver
Installation
| Panel | ||
|---|---|---|
| ||
Step 1 - Remove Existing Bezel |
- Remove any existing label surrounding the card slot on the card reader, if necessary.
- Remove the four screws securing the plastic grey bezel to the LaundryCard reader.
- Two screws are located above the card slot and two are located below.
- Retain screws for flat mount bezel install.
- Gently remove the plastic bezel.
| Panel | ||
|---|---|---|
| ||
Step 2 - Attach the Flat Mount Bezel |
- Place the LaundryCard reader assembly against the flat mount bezel and secure with four screws retained in step 1.
- Using needle nose pliers, gently bend the bracket holding the card reader screen until it lies flush against the upper slot in the flat mount bezel.
- Use caution as card reader circuitry and LCD screens are fragile.
- Once LaundryCard reader is satisfactorily secured and positioned, flat mount bezel may be mounted on appropriate machine facing using the materials provided in the associated kit.