| Panel |
|---|
| titleColor | white |
|---|
| titleBGColor | darkred |
|---|
| title | Overview |
|---|
|
This document is intended to guide the user through |
of a LaundryCard Receipt Printer. Estimated Installation Time: 30 Minutes |
Recommended Tools and Supplies (Not Included): See LaundryCard Kit Installation Home for more information.
Parts List
Kit:
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | com.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f |
|---|
| MultiExcerptName | Warning |
|---|
| PageWithExcerpt | CCIDOC:_General |
|---|
|
Type | PartsInstallation
Step 1 -
Install Installing the Lock
- Disassemble the 098760 the Service Lockby removing the nut, kep ring, cam, and mounting nut from the lock.
- Push the lock through the opening on the cover of the C-0665 Printer Cabinet and orient it so that the inserted key is vertically parallel to the longer sides of the cabinet.
- Slide the cam onto the lockshaft lock shaft with the protrusions facing upward.
- Slide on the kep ring and secure with the remaining nut.
Step 2 -
Mount Mounting Printer Cabinet
| Note |
|---|
| title | Receipt Printer Mounting |
|---|
|
The Receipt Printer cannot be mounted inside of an X-Changer cabinet. |
- Determine a suitable mounting location (wall or shelf mount) and remove the appropriate knockout.Mark C-0665 . Examples include:
- Behind a knockout wall.
- On a shelf in-between both X-Changers.
- Cable tied on a table.
- Mark the Printer Cabinetcable opening on the mounting surface and drill a 1" opening in mounting surface to allow cables to pass through.
- Attach printer cabinet the Printer Cabinet to surface with appropriate hardware (not provided).
Step 3 -
Install Installing Printer in Printer Cabinet
- Pass the C-1330 USB Cable and C-0667 Power Supply cable through the opening and connect the cables to the C-0666 Receipt Printer.
- Using the slotted holes on the C-0666 Receipt Printer, mount the printer it to the C-0665 Printer Cabinet. Adjust the printer as far toward the rear of the cabinet as possible.
- Load paper into the printer by lifting up on the paper bar.
- Lock bar back into place and open feeder release by pulling the Blue blue lever.
- Pull paper across the feeder and press down on the feeder assembly until it locks into place.
- Close the printer cabinet Printer Cabinet and turn the key to secure the lock.
Step 4 - Final Connections
- Connect the C-0618 Print Server to the C-1330 USB Cable.
- Connect the C-0178 Cat5 Cable to the C-0618 Print Server and to the network switch in the closest X-Changer A.
- Connect the C-0667 Power Supply to a the Receipt Printer and an appropriate power outlet.
- Connect the C-0618 Print Server power supply to a power outlet.to the Print Server and to an appropriate power outlet.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| title | Troubleshooting Articles |
|---|
| | Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| max | 20 |
|---|
| showSpace | false |
|---|
| sort | title |
|---|
| excludeCurrent | true |
|---|
| cql | label = "receipt-printer" and label = "kb-troubleshooting-article" and space = "KB" |
|---|
|
|
|
| Column |
|---|
| | Panel |
|---|
| title | Additional Documentation |
|---|
| | Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| max | 20 |
|---|
| showSpace | false |
|---|
| sort | title |
|---|
| excludeCurrent | true |
|---|
| cql | label = "receipt-printer" and space in ( "LG" , "LCV8" , "LCV9" ) |
|---|
|
|
|
|