Equipment Models

This document is valid for the following equipment models...

• HC20BC2OU6001
• HC30BC2OU6001
• HC40BC2OU6001
• HC80BC2OU6001
• SC20BC2YU6001
• SC30BC2YU6001
• SC40BC2YU6001
• SC80BC2YU6001 

Instructions

1. Make sure your card reader is connected to the washer and setup in the LaundryCard software correctly
2. Toggle switch on washer computer to enter program mode
3. Display will read TSFL
4. Press Asterisk button (Quick Wash Warm)
5. Press green (Start) button repeatedly until washer display TSFL again
6. Toggle switch back  of washer computer to set back to run mode
7. Check if card reader updates pricing on washer. If so test start the washer.
   
   1. If display of washer is NOT updating the price power cycle the washer
   2. If pricing still does not update you may need to reset WCRD.
      Easiest way to do this is: 
      
      1. Insert manager card into X-Changer
      2. Press Manager
      3. Press Equip Setup
      4. Press Config (Agree to the alert)
      5. When Config page loads press on the Done button
      6. Readers in store should refresh and washer should now be talking to reader.

...