Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel
borderColor#416EB6
titleColor#e6e6e6
titleBGColor#416EB6
titleOverview

This page is intended to provide the latest details about troubleshooting the FasCard Satellite Access Point (SAP) that connects to all the FasCard readers and equipment. 

Panel
titleColor#e6e6e6
titleBGColor#416EB6
titleOn This Page

Table of Contents
maxLevel2

Satellite Outage

In the event that the Satellite is offline, the card readers will not be able to accept payment via credit cards if the 'Offline Auth Amount' has not been assigned a value greater than $0.00. If coin payments are accepted, they will continue to work during such an event. Likewise, a loyalty card can be used if it has been cached as part of the last 5000 accounts that were saved by the Satellite prior to an outage. Additionally, the use of the SUPERCARD will allow machine starts only when the Satellite is offline. 

Once a Satellite is brought online, it will synchronize with the readers to update all account balances and transactions that occurred during the outage. 

Note
titleNote

While using a cell phone or other wireless device that utilizes a 4G/LTE connection it is possible to connect to a wireless network and still connect to the internet using cellular service if the store internet is down. It is for this reason that the recommended method for verifying store internet requires a laptop or other PC that does not use a cellular service for internet connectivity. Ideally, verifying there is an internet connection via an Ethernet cable would assist with the troubleshooting process. 

Symptom: Internet Down Icon Appears on FasCard Readers

F1 Icon

F2/F3 Icon

Image Removed

Image Removed

These icons indicate that the SAP is unable to connect to the internet, preventing normal credit and loyalty card processing.

F1 Icon

F2/F3 Icon

Image Added

Image Added

Solution: Reboot all Internet Devices 

Disconnect power from the modem, router(s) and the SAP. The SAP has two (2) possible power sources - Power over Ethernet or AC Adapter (do not use both types of power sources).

Fig. 1a - PoE Adapter, Top View  Fig. 1b - PoE Adapter, Side View  Fig. 1c - Satellite Access Point, Rear View

  1. Reconnect power to modem first and wait 2-5 minutes for it to come back online completely.
  2. Reconnect power to personal network devices (router and/or switch) and wait for them to come back online completely.
  3. Reconnect power to satellite the Satellite and wait 60 seconds for it to come back online completely.
  4. The satellite Satellite will beep once, then after approximately 30 seconds it will beep twice more.
  5. If the card readers still do not come back online, attempt to reach to reach an outside website (perform a new Google search to prevent appearance of cached pages).  

    Note

    Note that while using a cell phone or other wireless device that utilizes a 4G/LTE connection it is possible to connect to a wireless network and still connect to the internet using cellular service if the store internet is down.  It is for this reason that the recommended method for verifying store internet requires a laptop or other computer that does not use a cellular service for internet connectivity.  

Symptom:  Wireless Alert icon
  1.   

Symptom: Wireless Alert Icon Appears on FasCard Readers

F1 Icon

F2/F3 Icon

Image Removed

Image Removed

This icon indicates These icons indicate that the card readers are not communicating to the satellite Satellite itself and is are not dependent upon on an active internet connection. 

F1 Icon

F2/F3 Icon

Image Added

Image Added

Solution 1:

 Reboot

Reboot FasCard

reader

Reader

If one (1) card reader is displaying the Wireless Alert icon, power cycle the reader.  This This may require a power cycle of the machine to accomplish this, depending upon on its installation.  If If the issue persists or if multiple card readers are displaying the Wireless Alert icon, proceed to Solution 2, below.

Solution 2:  Reboot Reboot Satellite

  1. Disconnect PoE adapter (shown above, Fig. 1a)  from from the wall for 30 seconds, then reconnect. Check card readers again after 3-5 minutes.

  2. If the issue persists, reboot all internet devices devices as shown herein Solution: Reboot all Internet Devices above.

  3. If the issue still persists, contact CCI for further troubleshooting support. 

Filter by label (Content by label)
showLabelsfalse
max8
showSpacefalse
excludeCurrenttrue
cqllabel in ("satellite","sap") and space in ("LCE","KB")