Overview
The Galaxy 600 control is available exclusively on Alliance Huebsch washer-extractors
Images
Galaxy 600 Washer | Galaxy 600 Control |
---|---|
Model Numbers
- HCN020
- HCN030
- HCN040
- HCN060
- HCN080
Special Notes
- For older Galaxy 600 controls, a special jumper may be required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
- For current Galaxy 600 controls, the machine control board will have a one of two isolated methods for enabling 'Card' mode:
- A dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
- This is not to be confused for the communication board, which may also have a dipswitch panel.
- No dipswitch panel present. Enabling 'Card' mode would, thus, need to be set up in machine programming directly.
- A dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
Functionality
The following list describes the functionality that CCI FasCard reader has with control:
Cycle-based pricing
- The Galaxy 600 has 6 cycle options. FasCard can charge unique price for each cycle.
- Normal Hot
- Normal Warm
- Normal Cold
- Blankets Cold
- Delicate Warm
- Delicate Cold
- The Galaxy 600 has 6 cycle options. FasCard can charge unique price for each cycle.
Cycle modifier pricing
- The Galaxy 600 has 2 cycle modifiers: Extra Wash and Extra Rinse. FasCard can up-charge the vend price when user selects one or both of these options.
- Extra Wash
- Extra Rinse
- The Galaxy 600 has 2 cycle modifiers: Extra Wash and Extra Rinse. FasCard can up-charge the vend price when user selects one or both of these options.
Cycle Configuration
- The ability to enable, disable, or adjust the following options:
- Audio Signals
- Keypress
- End of Cycle
- Coin Drop
- Serial/Network Vend
- Start Pad
- Extra Wash Modifier Options (Key 1)
- Prewash
- Extra Rinse
- Add. Wash Time
- Add. Wash Time Minutes Dropdown (0-15)
- Warm Final Rinse
- Extra Wash Modifier Options (Key 2)
- Prewash
- Extra Rinse
- Add. Wash Time
- Add. Wash Time Minutes Dropdown (0-15)
- Warm Final Rinse
- Default Cycle/Temp
- Normal/Hot
- Normal/Warm
- Normal/Cold
- Blankets/Cold
- Delicate/Warm
- Delicate/Cold
- Default Cycle Modifiers
- None
- Extra Wash
- Extra Rinse
- Extra Wash and Extra Rinse
- Audio Signals
- The ability to enable, disable, or adjust the following options:
Screenshots
Cycle Configuration Interface - Equipment Setup | ||||
---|---|---|---|---|
Pricing Interface - Pricing/Schedule Setup | ||||
Table excerpt | ||
---|---|---|
| ||