Versions Compared

Old Version 1

changes.mady.by.user Former user

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  1. Locate the computer in X-Changer A.

    Info

    Premium LaundryCard Systems have a DELL computer laying flat on the upper most shelf.
    LaundryCard Lite Systems have an integrated PC and touchscreen solution mounted to the front of the X-Changer

  2. Ensure that the Keyboard and Mouse are connected.  It is recommended to access the computer's USB ports from the front of the X-Changer so access to the mouse and keyboard is available while viewing the monitor.

  3. Connect the USB mouse and keyboard to the computer. The mouse and keyboard should be located under the Tripp Lite battery, it is recommended to store the keyboard and mouse in this location when it is not in use.

    Peal off the "Insert Laundry Card" sticker on the local card reader, the two Philips Head Screws will be revealed.  Remove the two screws and pull the reader forward so that the two PS2 connections can fit through and proceed to connect the cables to the appropriate connections from the rear of the monitor.  Remove the cables and replace the card reader when finished with the setup

    .

    Note

    Always disconnect the Keyboard and Mouse when not using it, prior to closing the cabinet.

    Panel
    titleLite Systems

    Lite systems have an option for either a front loading cabinet or a rear opening cabinet.
    In a FRONT opening system, connect the mouse and keyboard to the PS2 ports on the bottom of the back of the monitor.

    Tip
    titleIn a REAR loading system
  4. Repeat the above step for the B cabinet.