Versions Compared

Old Version 10

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

cci-readerinstall-kitstep
KitIDcomponent581
KitDescACA Controls - 12VDC Accessory Power

  1. Connect the C-6204-40 12VDC Power Harness to the H10 connection on the machine control assembly.

    1. Secure the green wire beneath the ground screw.

  2. Connect the opposite end of the C-6204-40 Power Adapter Harness (3-pin molex) to the F2 reader.

...

Mounting

Cci readerinstall step
componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5382 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent696KitDescCoin Drop: Imonex with EM100/EM3
    Sense

    cci-readerinstall-kitstep
    KitIDcomponent700
    KitDescCoin Drop - Factory Optical

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6250 Coin Sense Harness to the Coin 1 machine harness connected to the coin drop.

    Connect Machine Interface Harness

    ...

    Start

    Cci readerinstall step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameACA Configuration
    PageWithExcerpt_Machine Configuration

    ...