Versions Compared

Version Old Version 10 New Version Current
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

cci-readerinstall-kitstep
KitIDcomponent581
KitDescACA Control - 12VDC Accessory Power

  1. Connect the C-6204-40 12VDC Power Harness to the H10 Connection on the Machine Control Assembly.

    1. Connect the green wire to a chassis ground.

  2. The remaining end (3-pin molex) connects directly to the rear of the F2 Reader.

...

Mounting

Cci readerinstall step
componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID700
    KitDescCoin Drop - Factory Optical
    step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitIDcomponent704
    KitDescCoin Slide - Factory Switch

    1. Disconnect the harness from micro switch.

    2. Connect both ends of C-6253 Coin Sense Harness to the micro switch.

    Connect Machine Interface Harness

    ...

    Start

    Cci readerinstall step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameACA Configuration
    PageWithExcerpt_Machine Configuration

    ...