Versions Compared

Old Version 10

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

cci-readerinstall-kitstep
KitID677
KitDescCoin Drop: Factory Mechanical Switch

  1. Disconnect the factor coin drop harness from the microswitch on the coin drop.

  2. Connect the C-5253 Coin Sense Harness to the microswitch on the the coin drop.

componentMounting

cci-readerinstall-kitstep
KitIDcomponent679
KitDescCoin Drop: Factory Optical Sensor

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.

Power

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitID696
    KitDescCoin Drop: Imonex w/EM Board
    componentCoin Sense

    cci-readerinstall-kit
    KitID704
    KitDescCoin Drop: Factory - Micro Switch

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID723
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID634
    KitDescPulse - Optical Sensor
    step
    componentStart

    cci-readerinstall-kitstep
    KitID636
    KitDescPulse - Micro Switch

    1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

    ...

    componentReader

    Machine Configuration

    No special configuration required.

    ...