Versions Compared

Old Version 12

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

cci-readerinstall-kitstep
KitID581
KitDescACA Controls

  1. Connect the C-6204-40 12VDC Power Harness to the H10 Connection on the Machine Control Assembly.

  2. Connect the green wire to a chassis ground.

  3. The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.

Connect Coin Sense Harness

componentMounting

cci-readerinstall-kitstep
KitID700
KitDescFactory Standard Coin Drop

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

componentPower

cci-readerinstall-kit
KitID704
KitDescFactory Standard Coin Slide

  1. Locate the micro switch on the coin slide assembly for the upper pocket.

  2. Disconnect the harness connected to the microswitch and connect C-6253 Coin Sense Harness to the spade tabs on the micro switch.

...

step
componentCoin Sense

cci-readerinstall-kit
KitID645
KitDescPulse - Coin Connection

  1. Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

Cci readerinstall kit
KitID582
KitDescSerial Communication / Serial Pulse

  1. Connect the C-5240 Machine Start Harness to the the H3 connection on the Machine Control Assembly or Communication board.

Connect the C-5256 Machine Start Harness to the the harness previously connected to the coin slide microswitch spade tabs.
Cci readerinstall kit
KitID636
KitDescHybrid Coin Slide Switch
step
componentStart

Cci readerinstall step
componentExtras

...