Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

  • Disconnect the Coin Drop from the Machine Control Assembly.

  • Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitID696
    KitDescCoin Drop: Imonex w/EM Board
    componentMounting

    cci-readerinstall-kitstep
    KitID704
    KitDescCoin Drop: Factory - Micro Switch
    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.

    componentPower

    cci-readerinstall-kit
    KitID707
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    step
    componentCoin Sense

    Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    cci-readerinstall-kitstep
    KitID634
    KitDescPulse - Optical Sensor
    componentStart

    cci-readerinstall-kit
    KitID636
    KitDescPulse - Micro Switch
    1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

    ...

    step
    componentReader

    Machine Configuration

    No special configuration required.

    ...