Install Mounting Hardware
| cci-readerinstall- |
|---|
...
| KitID | 591 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-5700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 904 |
|---|---|
| KitDesc | Card Only - Card Model |
...
Locate a spot on top of the machine to mount the reader. Verify included harnesses will reach desired location without encountering interference from internal machine components. Mark the location using C-5700-TEMP Drill Template.
...
Connect Power
...
| KitID | 663 |
|---|---|
| KitDesc | Tap Machine Power |
...
Connect Coin Sense Harness
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
| header |
|---|
Removing the Front Panel
| Include Page | ||||
|---|---|---|---|---|
|
| Cci readerinstall step | ||
|---|---|---|
| ||
| Cci readerinstall step | ||
|---|---|---|
| ||
Machine Configuration
Enter Service Mode and navigate to J option.
Set option to J.d.
Exit Service Mode.
| Cci readerinstall footer |
|---|