Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Disconnect the Coin Drop from the Machine Control Assembly.

  • Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.Place C-5763 TWL Bracket in the intended mounting location. Using the bracket, mark the location of all four mounting holes.
    Drill a hole at each marked location using a 3/16" drill bit.
    Attach C-5414 Mounting Bracket to the front of C-5763 using two C-5420 screws.
  • Mount the C-5763 TLW Bracket using four C-5420 Screws and fasten from the inside of the panel.

  • cci-readerinstall-kitstep
    Cci readerinstall kit
    KitID700
    KitDescCoin Drop - Factory Optical
    KitIDcomponent0
    KitDescCard Only - Rear Control Card Models

    Connect Power

    Connect Coin Sense Harness

    Mounting

    Cci readerinstall step
    componentPower

    Cci readerinstall step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitIDcomponent704
    KitDescCoin Slide - Factory Coin Slide Switch
    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Slide Switch.

    Connect Machine Interface Harness

    ...

    Start

    Cci readerinstall step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameACA Configuration
    PageWithExcerpt_Machine Configuration

    ...