Overview
| Multiexcerpt | ||
|---|---|---|
| ||
This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below. |
Install Header
| Multiexcerpt | ||
|---|---|---|
| ||
This document assumes the installer has working knowledge of hand tools and of the target machine in question. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine. Required HardwareCard Reader |
Reader Ports
...
| MultiExcerptName | Reader ports |
|---|
...
Additional Info
...
| MultiExcerptName | Additional Info |
|---|
...
Additional Information
...
Unverified
...
| MultiExcerptName | Unverified |
|---|
...
ACA Dip Switches
| Excerpt | ||
|---|---|---|
| ||
ACA machines using a serial configuration require dip switch 3 on the Machine Control Board to be set to the 'ON' position. Leave all other dip switches as is. |
ACA Card Ready
| Excerpt | ||
|---|---|---|
| ||
ACA Card Ready machines using a pulse configuration require a retrofit to a Coin-Ready state. This may require obtaining an additional Coin Sense Harness from Alliance. |