| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Technician's Cards look like a customer LaundryCard™, but |
...
can also show |
...
which machines are marked out of service and why, based on the Equipment Status selected. Once |
...
a technician has repaired a machine, with the technician card used at an X-Changer, you can then tell the system that the machine is again ready for use. The manager can also put value on |
...
a technician card for starting machines. |
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
|
General Information for Technicians
LaundryCard readers are the devices that read
...
a LaundryCard™. The card reader acts as an electronic coin drop, designed with a pulse relay that simulates the native pulse from a coin drop. Card readers are installed on equipment throughout the store. (You may also see card readers on doors).
...
The card readers have a display that tells you
...
the account balance on a card used and the price of the specific machine. The display can also
...
act as a timer to let you know how much time is left on a machine before it is available again.
Technician Default
...
...
...
The default permission settings for a Technician are shown below.
The Defaulted settings dictate the Technician's Welcome screen menu
...
.
Maintenance
Clock in/out
Getting a New Technicians Card
Issuing a Technician's card is done by the store manager
...
.
...
Note:
...
An attendant may typically
...
disable a card reader when
...
a machine no longer functions properly, and then the Technician
...
may be called in.
...
Overview of Technician Default Setting Functions
...