Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID871
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach C-5414 F2 Mounting Bracket to the C-6928 Vault Mounting Bracket using the C-5420 Screws.

    3. Install the C-6928 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

    ...

    step
    componentMounting

    Tap power as described in the document using theC-5101 Spade Taps provided.Connect theC-5210 Power Adapter Harnessto the installed spade taps.Connect theC-5210 Power Adapter Harness to theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.Connect the opposite end of theC-5210 Power Adapter Harnessto theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kit
    KitID595

    Connect Coin Sense Harness

    step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID716
    KitDescCoin Drop: Factory
    step
    componentCoin Sense

  • Disconnect the Coin Drops from the Machine Control Assembly.
    • Connect theC-6357Coin Sense Harnessto the harness connected to the Coin Sensor on the first coin drop.Repeat using the second C-6357 Coin Sense Harnessand the secondary Coin Sensor.
    cci-readerinstall-kit
    KitID956
    KitDescCoin Drop: Dual Coin Drops

    Connect Machine Interface Harness

    Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID655
    KitDescPulse
    step
    componentStart

    cci-readerinstall-kit
    KitID814
    KitDescSerial
    1. Connect the C-0126-MLV Machine Start Harness to the RS232 connector on the Machine Control Assembly.
    2. Connect the C-5359 Machine Start Harness to the Input connector on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. For dual coin drop setups connect the secondary C-6357 Coin Sense Harness to port 4 (Coin Sense Harness Connection Port) as shown in the image above.

    ...

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer