Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.

  • Remove existing coin box.

    • Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.Bend the side tabs of theC-6936Bracketoutward and install into the coin vault. The tabs should snap into place securing the bracket.Attach theC-5414F2 Mounting Bracketto the Coin Vault Bracketusing C-0144 screws.
    cci-readerinstall-kitstep
    KitID841
    KitDescCoin and Card
    Cci readerinstall kit
    KitID856
    KitDescCard Only

    ...

    componentMounting

    Tap power as described in the document using the C-5101 Spade Taps provided.Connect the opposite end of theC-5210 Power Adapter Harnessto theC-5602Power Converter.Connect theC-5500-84Power Extension Harness to the appropriate connector on theC-5602Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kit
    KitID794

    Connect Coin Sense Harness

    step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the C-6250 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    700
    KitIDcomponentKitDescCoin Drop: EDC
    Sense

    cci-readerinstall-kit
    KitID704
    KitDescCoin Drop: Push Button Control
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6253 Coin Sense Harness to the micro switch on the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5300-NC Machine Start Harness to the Coin 1 harness connected to the Machine Control Assembly.
    Cci readerinstall kit
    KitID645
    KitDescPulse - EDC
    step
    componentStart

    cci-readerinstall-kitstep
    KitID952
    KitDescPulse - Push Button Control
    1. Connect the C-5256 Machine Start Harness to the Coin 1 harness connected to the Machine Control Assembly.
      1. If needed, connect the C-0122 Space Taps to the coin drop wires.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
    2. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
    3. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
    4. Connect the free end of the Power Harness to port 1.
    5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

    Machine Configuration

    ...

    componentReader

    Cci readerinstall footer