Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.Place theC-6700-TEMPDrill Template on the desired mounting location.
    cci-readerinstall-kitstep
    KitIDcomponent584
    KitDescCoin and Card
    Mounting

    Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
  • Optional: Apply C-5033 Label over coin drop opening.
    • cci-readerinstall-kit
    KitID994
    KitDescCard Only

    ...

    step
    componentPower

    Use the C-5101 Spade Tapson the incoming power.Tap theL1wire.Tap theNwire.Tap theGround wire.Take the C-5210 Power Adapter Harnessand connect the red tab connectors to the following wires:Connect thebluewire to theL1wire.Connect thebrownwire to theNwire.Connect the green/yellow wire to theGroundwire.Connect the 3-pin connector from the C-5210 Power Adapter Harnessto the matching connection on the C-5602R1Power Converter.Connect the4-pinconnector from the C-5602R1 Power Converterto the matching connection on the C-5500-60Power Extension Harness.
    cci-readerinstall-kitstep
    KitID802
    KitDescTap Machine Power

    ...

    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-6368 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent722
    KitDescFactory Coin Drop

    Connect Machine Interface Harness

    Start

    Connect theC-5369R1Machine Start Harness to theCoin 1connector on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID664
    KitDescPulse - Phase 7 Control

    Connect and Mount Reader

    ...

    step
    componentReader

    Cci readerinstall footer