| cci-readerinstall-kitstep |
|---|
|
Remove existing coin box.
Insert the C-5710 Rubber Grommet into the central hole of the C-6936 Vault Bracket.Run all reader harnesses through coin vault and then the hole of the C-6936 Vault Bracket.Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.
Run all reader harnesses through the central hole of the C-5414 Reader Bracket. Attach the C-5414 Reader Bracket to the C-6936 Vault Bracketusing the C-0144 screw.
| cci-readerinstall-kitstep |
|---|
|
Tap power as described in the document by connecting the C-5336 Power Adapter Harness to the power distribution terminal block inside the machine.Use C-5101 Spade Tap on a L1 and L2 power wire.
- Connect the C-5336 Power Adapter Harness. Blue wire to L1 and Brown to L2.
Connect the Green/Yellow wire to the ground screw.
Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602R1 Power Converter.
Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.
...
...