Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.
  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID584
    KitDescCoin and Card
    componentMounting

  • Remove existing coin drop.

  • Install C-0913 Drop Coverwhere the coin drop was previously installed. Secure in place with C-1062 Kep Nuts.Place theC-6700-TEMPDrill Template on the desired mounting location.
  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to for further instructions.
    cci-readerinstall-kit
    KitID959
    KitDescCard Only

    ...

    step
    componentPower

    Tap the machine AC power wires using theC-5101Spade Taps.For120vmodels:L1,N, andGroundwiresFor240vmodels:L1,L2, andGroundwiresConnect the three wires from the C-5210 Power Adapter Harnessto theC-5101 Spade Taps.Connect theBluewire to the L1tap.Connect the Brownwire to the N/L2tap.Connect theGreen/Yellowwire to the Groundtap.Connect the 3-pinconnector from the C-5210 Power Adapter Harnessto the matching connector on the C-5602R1 Power Converter.Connect the 4-pinconnector from theC-5602R1 Power Converterto the matching connector on theC-5500-60Power Extension Harness.Run the C-5500-60Power Extension Harness to the reader mounting location.
    cci-readerinstall-kit
    KitID802
    KitDescTap Machine Source Power

    ...

    step
    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
  • Connect theC-6368 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitID722
    KitDescFactory - Optical Coin Drop

    ...

    componentStart

    Connect theC-5369R1Machine Start Harness to theCoin 1connector on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID664
    KitDescPulse - Phase 7

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    step
    componentReader

    Cci readerinstall footer