Versions Compared

Version Old Version 3 New Version Current
Changes made by

CCI Integration User

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.

  • Remove existing coin box and coin drop.

  • Attach C-5414 Standard Mounting Bracket to the C-6928 Vault Mounting Bracket using (2) C-5420 10-32 x 1/4" Phillips Screws.
    • Install the C-6928 Mounting Bracket into the coin vault opening. Secure in place using (2) C-1059 10-32 Keps Nuts.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID871
    KitDescCard Only - 30lb or Smaller Models
    step
    componentMounting

  • Remove existing coin box and coin drop.

    • Attach the C-5414 Standard Mounting Bracket to theC-6934 Vault Mounting Bracket using (2) C-5420 10-32 x 1/4" Phillips Screws.

  • Install the C-6934 Vault Mounting Bracket into the coin vault opening. Secure in place using (2) C-1059 10-32 Keps Nuts.

    • cci-readerinstall-kit
    KitID852
    KitDescCard Only - 40lb or Larger Models

    ...

    step
    componentPower

    Tap power as described in the document using theC-5101 Spade Taps provided.Connect theC-5210 Power Adapter Harnessto the installed spade taps.Connect theC-5210 Power Adapter Harness to theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.Connect the opposite end of theC-5210 Power Adapter Harnessto theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kitstep
    KitID595

    ...

    componentCoin Sense

    cci-readerinstall-kitstep
    KitID716
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    ...

    componentStart

    cci-readerinstall-kit
    KitID814
    KitDescSerial
    1. Connect the C-0126-MLV Machine Start Harness to the RS232 connector on the Machine Control Assembly.
    2. Connect the C-5359 Machine Start Harness to the Input connector on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    step
    componentReader

    Cci readerinstall footer