Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID841
    KitDescCoin and Card

    Connect Power

    componentMounting

    Tap power as described in the document using theC-5101 Spade Taps provided.Connect theC-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.Connect theC-5500-60 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kitstep
    KitID802

    ...

    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID711
    KitDescCoin Drop: Phase 5
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6343 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID722
    KitDescCoin Drop: Phase 7
    step
    componentCoin Sense

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the first C-6343 Coin Sense Harness to the coin drop harness connected to theCoin 1connector on the Machine Control Assembly.Connect the second C-6343 Coin Sense Harnessto the coin drop harness connected to the Coin 2connector on the Machine Control Assembly.
    cci-readerinstall-kitstep
    KitID723
    KitDescCoin Drop: Imonex with EM100 Coin Multiplier
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6382 Coin Sense Harness to the 4-pin harness connected to the EM100 board.
    Cci readerinstall kit
    KitID977
    KitDescCoin Drop: Dual Coin Phase 5

    Connect Machine Interface Harness

    Connect the C-5344 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID652
    KitDescPulse - Phase 5
    componentStart

    cci-readerinstall-kit
    KitID653
    KitDescPulse - Phase 7
    1. Connect the C-5345 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer