| cci-readerinstall-kit |
|---|
| KitID | 584 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place theC-6700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 906 |
|---|
| KitDesc | Card Only - Card Models |
|---|
|
Place theC-6700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 861 |
|---|
| KitDesc | Card Only - Reader Control Coin Models |
|---|
|
Remove thecoin drop and coin box.Remove Vault Switchand bridge the wires previously connected to the Vault Switchwith the C-5365 Bypass Harness.Secure C-5414 F2 Mounting Bracketto the C-6903Mounting Bracket using the(2)C-542010-32 x 1/4 Pan Screws.Attach the C-5760-AAdapter Bracketto the C-6762 Mounting Bracketto the captured nut on the inside of the C-6762 Mounting Bracket.Run all reader harnesses through the metercase and out the opening where the coin drop normally mounts.Run all reader harnesses through the circular opening on theC-6762Mounting Bracket.Install theC-6762Mounting Bracketinto the front opening of the metercase so the two threaded posts of the C-5760-A Adapter Bracketline up with the openings for the coin slots. Secure in place using theC-1059 Nutand C-1070-W Washer.| Cci readerinstall kit |
|---|
| KitID | 857 |
|---|
| KitDesc | Card Only - White 10° Panel Coin Models |
|---|
|
Remove existing coin box and coin drop.
Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.Attach theC-5414 F2 Mounting Bracketto the C-6765-W-R1 Metercase Bracketusing (2) C-5420 10-32 x 1/4 Pan Screws.Run any card reader harnesses through the coin slot openings and the circular hole in theC-6765-W-R1Metercase Bracket.Install theC-6765-W-R1Metercase Bracketso that the two threaded posts insert into the coin drop slots. Then secure it to the machine using the (2) C-1059 Kep Nutsand (2) C-1070-WWashers.| Cci readerinstall kit |
|---|
| KitID | 996 |
|---|
| KitDesc | Card Only - Black 10° Panel Coin Models |
|---|
|
Remove existing coin box and coin drop.
Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.Attach theC-5414 F2 Mounting Bracketto the C-6765-B Metercase Bracketusing (2) C-5420 10-32 x 1/4 Pan Screws.Run any card reader harnesses through the coin slot openings and the circular hole in theC-6765-BMetercase Bracket.Install theC-6765-BMetercase Bracketso that the two threaded posts insert into the coin drop slots. Then secure it to the machine using the (2) C-1059 Kep Nutsand (2) C-1070-WWashers.
...
...
...
...
...
...