| cci-readerinstall-kit |
|---|
| KitID | 584 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place theC-6700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 861 |
|---|
| KitDesc | Card Only - Coin Model w/ High Capacity Metercase |
|---|
|
Remove existing coin box and coin drop.
Bridge the Coin Vault Switchconnections using C-5365 Bypass Harness.Attach C-5760-A Alliance Adapter Bracketto C-6762 Metercase Bracket.Attach theC-5414 Mounting Bracketto C-6762Metercase Bracket using the(2)C-5420 10-32 x 1/4 Pan Screws.Mount C-6762 Metercase Bracketinto the front of the metercase, inserting the two studs through the coin slot openings.Secure to the metercase using (2)C-1059 Kep Nutsand(2)C-1070-WWashers.| step |
|---|
|
|
| cci-readerinstall-kit |
|---|
| KitID | 916 |
|---|
| KitDesc | Card Only - Coin Model w/ Standard Metercase |
|---|
|
Remove existing coin box and coin drop.
Attach C-5760-A Alliance Adapter Bracketto C-6760 Metercase Bracket.Attach theC-5414 Mounting Bracketto C-6760Metercase Bracket using the(2)C-5420 10-32 x 1/4 Pan Screws.Mount C-6760 Metercase Bracketinto the front of the metercase, inserting the two studs through the coin slot openings.Secure to the metercase using (2)C-1059 Kep Nutsand(2)C-1070-WWashers.| Cci readerinstall kit |
|---|
| KitID | 969 |
|---|
| KitDesc | Card Only - Card Model |
|---|
|
Place C-5763 TWL Bracketin the intended mounting location. Using the bracket, mark the location of all four mounting holes.
Drill a hole at each marked location using a3/16" drill bit.
Attach C-5414 Mounting Bracketto the front of C-5763 using the(2)C-5420 10-32 x 1/4 Pan Screws.
Mount the C-5763 TLW Bracketusing four using the(2)C-542010-32 x 1/4 Pan Screws.and fasten from the inside of the panel.
...
...
...
...