Versions Compared

Version Old Version 3 New Version Current
Changes made by

CCI Integration User

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.

  • Remove existing coin box.

    • Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.Bend the side tabs of theC-6936Bracketoutward and install into the coin vault. The tabs should snap into place securing the bracket.Attach theC-5414F2 Mounting Bracketto the Coin Vault Bracketusing C-0144 screws.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID851
    KitDescCard Only - Coin Ready
    step
    componentMounting

    Install the C-6970R1Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.Attach the C-5414F2 Mounting Bracketto the C-6970R1Alliance Mounting Bracketand secure using the C-1060Screws.Refer to for further instructions.
    cci-readerinstall-kit
    KitID846
    KitDescCard Only - Card Ready

    ...

    step
    componentPower

    Tap power as described in the document using the C-5101 Spade Taps provided.
  • Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    • cci-readerinstall-kit
    KitID595

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID700
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID928
    KitDescCoin Drop: Dual Coin
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the first C-6250 Coin Sense Harness to the coin drop harness connected to the Coin 1 connector on the Machine Control Assembly.
    3. Connect the second C-6250 Coin Sense Harness to the coin drop harness connected to the Coin 2 connector on the Machine Control Assembly.

    Connect Machine Interface Harness

    Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID645
    KitDescPulse
    step
    componentStart

  • Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
    • Connect theC-0110-CP Jumper Plugto the H6connection on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID603
    KitDescSerial

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. Dual coin setups, connect the free end of the C-6250 Coin Sense Harness connected to the Coin 2 harness to port 4 (Coin 2 Sense Harness Connection Port) as shown in the image above.

    ...

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer