Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.Install the C-5702Chase Nippleinto the C-5414F2 Mounting Bracketusing the C-5703Nut.Feed the remaining harness ends through the open face of theCoin Vault.Spread the C-6936Vault Mount Bracketwings outward before insertion to lock bracket into place.Feed remaining harness ends through the C-6936Vault Mount Bracket.Insert the C-6936Vault Mount Bracketinto theCoin Vault.Feed the remaining harness ends through the combined C-5414F2 Mounting Bracket.Secure the combined C-5414F2 Mounting Bracketto the C-6939 Vault Mount Bracket with the C-0144Screws.Attach the C-5414F2 Mounting Bracket to the C-6602 Spacer Plate using the C-5702Chase Nipple and the C-5703Nut.Feed the remaining harness ends through the open face of theCoin Vault.Spread the C-6602Vault Mount Bracketwings outward before insertion to lock bracket into place.Feed remaining harness ends through the C-6602Vault Mount Bracket.Insert the C-6602Vault Mount Bracketinto theCoin Vault.Feed the remaining harness ends through the combined C-5414F2 Mounting Bracket.Secure the combined C-5414F2 Mounting Bracketto the C-6602 Vault Mount Bracket with the C-0144Screws.

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID667
    KitDescCard Only - Small Coin Vault
    Cci readerinstall kit
    KitID840
    KitDescCard Only - Large Coin Vault
    Cci readerinstall kit
    KitID906
    KitDescEasy Card Ready

    ...

    step
    componentMounting

    Cci readerinstall step
    componentPower

    Tap power as described in the document by connecting the C-5338Power Adapter Harness to the power distribution panel inside the machine or tapping as needed.
    1. 240vac- Connect Blue wire to the L1 tab, and the Brown wire to the L2 tab on the terminal block.
    2. Secure the green wire beneath the ground screw.
    Connect the opposite end of theC-5338 Power Adapter Harnessto the C-5602 Power Converter.
  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
    • cci-readerinstall-kitstep
    KitID473

    ...

    componentCoin Sense

    cci-readerinstall-kit
    KitID704
    KitDescCoin Drop: Factory - Micro Switch
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID707
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID723
    KitDescCoin Drop: Factory
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.
    Cci readerinstall kit
    KitID709
    KitDescCoin Drop: Imonex Dual Coin
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6261 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID634
    KitDescPulse - Optical Sensor
    step
    componentStart

    cci-readerinstall-kit
    KitID636
    KitDescPulse - Micro Switch
    1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. If installing C-6261 Coin Sense Harness, connect the secondary connection with the red and orange wires to port 4.

    ...

    step
    componentReader

    Machine Configuration

    No special configuration required.

    ...