Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID584
    KitDescCoin and Card
    componentMounting

  • Remove the existing payment device panel and put aside the fasteners securing the panel in place.

    • Place the C-5414 Standard Mounting Bracket over the front of the C-6971 FC Mounting Bracket so the three large, circular openings align and attach using the(2) C-542010-32 x 1/4" Screws.
  • Install the C-6971 FC Mounting Bracket into the payment device panel opening. Secure in place using the factory fasteners.
    • cci-readerinstall-kit
    KitID1011
    KitDescCard Only

    ...

    step
    componentPower

    Tap power as described in the document by connecting theC-5210Power Adapter Harnessto the power distribution panel inside the machine.

    1. 120vac: Connect the blue wire to L1 and the brown wire to N.

    2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

    3. Connect the green wire to ground.

    Connect the opposite end of theC-5210Power Adapter Harnessto theC-5602R1Power Converter.Connect theC-5500Power Extension Harness to the appropriate connector on theC-5602R1Power Converter. The remaining cable end connects to the FasCard reader.
    cci-readerinstall-kit
    KitID802

    ...

    step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitID1007
    KitDescElectronic and Optical
    1. Disconnect the coin drop 6-pin connection from the machine.
    2. Connect the C-6373 Coin Sense Harness to the coin drop.

    Connect Machine Interface Harness

    componentStart

    cci-readerinstall-kit
    KitID1008
    KitDescPulse
    1. Connect the C-5374 Machine Start Harness to the CN6 6-pin connector used for the coin drop.

    Connect and Mount Reader

    ...

    step
    componentReader

    Cci readerinstall footer