Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID584
    KitDescCoin and Card
    componentMounting

  • Remove existing coin drop and coin box from the metercase.
    • Attach theC-5414 F2 Mounting Bracketto the C-6912 Metercase Bracketusing(2)C-542010-32 x 1/4 Pan Screws.
  • Run the C-5500 Power Extension Harness and C-5355 Machine Start Harness through the metercase and then through the circular opening in the C-6912 Metercase Bracket.
  • Insert the assembled C-6912 Metercase Bracket into the metercase and secure from the inside using the C-1059 Keps Nuts.
    • cci-readerinstall-kit
    KitID1013
    KitDescCard Only - Metercase Model

    ...

    step
    componentPower

    cci-readerinstall-kit
    KitID595
    KitDescSpade Tap Power Converter
    1. Use the C-5101 Spade Taps on the incoming power.
      1. Tap the black L1 wire.
      2. Tap the white N wire.
      3. Tap the green G wire.
    2. Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:
      1. Connect the blue wire to the black L1 wire.
      2. Connect the brown wire to the white N wire.
      3. Connect the green/yellow wire to the green G wire.
    3. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.
    4. Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID715
    KitDescOptical Coin Sensor
    1. Connect the C-6352-40 Machine Start Harness to the Coin 1 Connection located inside the metercase.

    ...

    step
    componentStart

    cci-readerinstall-kit
    KitID658
    KitDescSerial Communication Harness
    1. Connect the C-5355 Machine Start Harness to the CN4 Payment Device Connection located inside the metercase.

    Connect and Mount Reader

    ...

    step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameEncore - FLW
    PageWithExcerpt_Machine Configuration

    ...