Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    cci-readerinstall-kitstep
    KitID584
    KitDescCoin and Card
    componentMounting

    Feed all reader harness ends through the open face of theCoin Vault.Spread theC-6602 Vault Mount Bracketwings outward.Feed the harness ends through theC-6602Vault Mount Bracket.Insert theC-6602Vault Mount Bracketinto theCoin Vaultand ensure the inner tabs lock into place so it's secured in place.Feed the remaining harness ends through both theC-6601Filler PlateandC-5414F2 Mounting Bracket.Secure both the C-5414 F2 Mounting Bracket and C-6601 Filler Plate to theC-6602 Vault Mount Bracket with theC-0144 Screws.
    cci-readerinstall-kit
    KitID1033
    KitDescCard Only - Coin Model

    ...

    step
    componentPower

    Tap the machine AC power wires using theC-5101Spade Taps.For120vmodels:L1,N, andGroundwiresFor240vmodels:L1,L2, andGroundwiresConnect the three wires from the C-5210 Power Adapter Harnessto theC-5101 Spade Taps.Connect theBluewire to the L1tap.Connect the Brownwire to the N/L2tap.Connect theGreen/Yellowwire to the Groundtap.Connect the 3-pinconnector from the C-5210 Power Adapter Harnessto the matching connector on the C-5602R1 Power Converter.Connect the 4-pinconnector from theC-5602R1 Power Converterto the matching connector on theC-5500-60Power Extension Harness.Run the C-5500-60Power Extension Harness to the reader mounting location.
    cci-readerinstall-kitstep
    KitID802
    KitDescTap Source Machine Power

    ...

    componentCoin Sense

    Cci readerinstall kit
    KitID719
    KitDescCoin Drop - Factory Optical

    1. Disconnect coin drop from factory machine harness.

    2. Connect C-6360 Coin Sense Harness to the coin drop.

      1. Connect red to red.

      2. Connect green to brown.

      3. Connect blue to blue.

    ...

    Cci readerinstall step
    componentStart

    Cci readerinstall kit
    KitID636
    KitDescPulse - Coin Connection

    1. Connect the C-5256 Machine Start Harness to the harness originally connected to the coin drop.

      1. Connect to the black and brown wires.

      2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Cci readerinstall step
    componentReader

    Cci readerinstall footer