Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Remove thecoin boxandcoin drop/slidefrom the machine's meter case.
  • Attach the C-5414 Mounting Bracket to the C-6911 Meter Case Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.
    • Insert the assembled C-6911Meter Case Bracketinto the front opening of the machine's meter case.Secure the C-6911Meter Case Bracketinto place by attaching theC-0301Mounting Bolt to the cage nut at the top of the C-6911Meter Case Bracketfrom inside the machine's meter case.
  • After connecting all harnesses to the reader, use the (2) C-5416 8-32 x 3/8" Security Torx Screws to secure the reader to the C-5414 Mounting Bracket.
    • cci-readerinstall-kit
    KitID598
    KitDescCard Only - Coin Models

    ...

    step
    componentMounting

    Cci readerinstall step
    componentPower

    Locate the incoming120vpower connection.Thegreen ground wireshould connect to points on the chassis and front panel.Theblack and white wiresend in a white connector.AttachC-5101Spade Tapto theblack wire,white wire, andgreen ground wire.Connect the C-5210 Power Adapter Harness to the spade taps.Blue wireto black wire.Brown wireto whitewire.Green wireto green wire.
  • Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602R1 Power Converter.
    • Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on theC-5500 Power Extension Harness.
    cci-readerinstall-kitstep
    KitID595
    KitDescTap Source Machine Power

    Connect Machine Interface Harness

    componentStart

    Cci readerinstall kit
    KitID665
    KitDescPulse - Coin

    1. Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    ...

    Cci readerinstall step
    componentReader

    Cci readerinstall footer