| cci-readerinstall-kit |
|---|
| KitID | 616 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place theC-5700-TEMPDrill Template on the desired mounting location.Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
| KitID | 663 |
|---|
| KitDesc | Tap Machine Power |
|---|
|
Tap power as described in the document by connecting theC-5336Power Adapter Harnessto the power distribution panel inside the machine.120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and brown wire to L2.
Secure the green wire beneath the ground screw.
Connect the opposite end of theC-5336Power Adapter Harnessto theC-5602R1Power Converter.Connect theC-5500Power Extension Harness to the appropriate connector on theC-5602R1Power Converter. The remaining cable end connects to the FasCard reader.| Cci readerinstall kit |
|---|
| KitID | 841 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to for further instructions.| Cci readerinstall kit |
|---|
|
Feed the harness ends through thecoin vault opening and then through the circular opening in theC-6602Vault Mount Bracket.Spread theC-6602Vault Mount Bracketwings outward and then insert theC-6602Vault Mount Bracketinto thecoin vault.Feed the harness ends through the C-5414 F2 Mounting Bracket and C-6601 Spacer Plate.
Secure theC-5414F2 Mounting Bracketand C-6601 Spacer Plate to theC-6939 Vault Mount Bracket with theC-0144Screws.Install theC-5710 Rubber Grommetinto the circular opening of the C-5414 F2 Mounting Bracketand C-6601Spacer Plate.Remove any existing coin drop.
Mount the C-0926 Drop Cover and secure in place with C-1044N Nuts.
...
...
...
...
...
...
...