Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    step
    componentMounting

    cci-readerinstall-kit
    KitID959
    KitDescCard Only

    1. Remove existing payment device and coin box.

    2. Install the C-6925A Coin Vault Bracket in the coin vault. Line up the C-6925B Coin Vault Cover Bracket over the coin vault so the outer set of holes line up with the threaded holes on the C-6925A Coin Vault Bracket and attach with the C-57518-32 x 2-1/2" Phillips Screws.

    3. Use the (2) C-5420 10-32 x 1/4" Phillips Screws to attach the C-5414 Reader Bracket to the C-6925B Coin Vault Cover Bracket.

    4. Install the C-0913 Drop Cover into the coin drop opening. Secure in place using the (4) C-1062 4-40 Keps Nuts.

    5. Apply C-5035 Label onto the C-0913 Drop Cover.

    6. After connecting all harnesses to the reader, use the (2) C-5416 8-32 x 3/8" Torx Screws to attach the reader to the C-5414 Reader Bracket.

    ...

    step
    componentPower

    Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

    1. 120vac: Connect the blue wire to L1 and the brown wire to N.

    2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

    3. Secure the green wire to the ground wire.

  • Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

  • Connect the C-5500-60 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID802

    ...

    step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitIDcomponent722
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    ...

    Start

    Cci readerinstall step
    componentReader

    Cci readerinstall footer