Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

cci-readerinstall-kit
KitID869
KitDescCard Only

  1. Remove existing coin box and coin drop.

  2. Attach the C-5414 F2 Mounting Bracket to the C-6920R1 Vault Mount Bracket using the C-5420 Screws.

  3. Install C-6920R1 Vault Mount Bracket into the coin vault. Secure in place with C-1059 Kep Nuts.

Connect Power

step
componentMounting

Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  • Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID0
    KitDescChange Me

    ...

    step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6389 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID655
    KitDescCoin Drop: Factory - Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5353R1 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID725
    KitDescCoin Drop: Factory
    step
    componentCoin Sense

    Cci readerinstall kit
    KitID890
    KitDescCoin Drop: Factory - Keltner SR1-WIR 110-220v

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6380 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5388 Machine Start Harness to the connection previously used by the coin drop.
    cci-readerinstall-kit
    KitID655
    KitDescPulse - Edge Connector

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID666
    KitDescPulse - Set-O-Matic Standard Connection
    step
    componentStart

    Cci readerinstall kit
    KitID623
    KitDescPulse - Rotary Timer

    1. Connect the C-0119R1F Machine Start Harness to the X21 connection on the Machine Control Assembly.

    ...