Page Comparison

Cci readerinstall header

Place the C-6700-TEMP Drill Template on the desired mounting location.

Verify included harnesses will reach desired location without encountering interference from internal machine components.

Refer to

F2 Mounting Guide

for further instructions.

cci-readerinstall-kit

KitID	584
KitDesc	Coin and Card

step

component	Mounting

Place the C-6700-TEMP Drill Template on the desired mounting location.

Verify included harnesses will reach desired location without encountering interference from internal machine components.

Refer to

F2 Mounting Guide

for further instructions.

Optional: Apply C-5033 Label over coin drop opening.

cci-readerinstall-kit

KitID	994
KitDesc	Card Only

...

step

component	Power

cci-readerinstall-kitstep

KitID	802
KitDesc	Tap Machine Power

Use the C-5101 Spade Taps on the incoming power.
1. Tap the L1 wire.
2. Tap the N wire.
3. Tap the Ground wire.
Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:
1. Connect the blue wire to the L1 wire.
2. Connect the brown wire to the N wire.
3. Connect the green/yellow wire to the Ground wire.
Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500-60 Power Extension Harness.

...

component	Coin Sense

cci-readerinstall-kitstep

KitIDcomponent	722
KitDesc	Factory Coin Drop

Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.

...

Start

Cci readerinstall step

component	Reader

Cci readerinstall footer

Versions Compared