| cci-readerinstall-kit |
|---|
| KitID | 598 |
|---|
| KitDesc | Card Only - Coin Model |
|---|
|
Remove existing coin box and coin mechanism.
Run reader harnesses through the metercase and out the opening where the coin mechanism was mounted.
Attach the C-5414 Reader Bracket to the C-6911 Metercase Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.Insert the reader harnesses through the hole in the C-6911 Metercase Bracket and then insert the bracket into the metercase opening.
Secure the C-6911 Metercase Bracket to the metercase using the C-0301 Mounting Bolt.
| cci-readerinstall-kit |
|---|
| KitID | 595 |
|---|
| KitDesc | Tap 120v Machine Power |
|---|
|
Use the C-5101 Spade Taps on the incoming power.
Tap the L1 wire.
Tap the N wire.
Tap the Ground wire.
Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:
Connect the blue wire to the L1 wire.
Connect the brown wire to the N wire.
Connect the green/yellow wire to the Ground wire.
Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.| step |
|---|
|
|
...