Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-5700-TEMP Drill Template on the desired mounting location.

  • Verify that included harnesses will reach the desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kitstep
    KitID616
    KitDescCoin and Card
    componentMounting

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID841
    KitDescCoin and Card
    Cci readerinstall kit
    KitID948
    KitDescCard Only

    1. Remove existing coin box.

    2. Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

    3. Attach the C-5414 Mounting Bracket to the C-6936 Vault Bracket using the C-0144 Screws.

    ...

    step
    componentPower

    Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5213 Power Adapter Harness to the power distribution panel inside the machine.

    1. 120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.

    2. 240vac: Connect the brown and blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.

    3. Secure the green wire beneath the ground screw.

  • Connect the opposite end of the C-5213 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID617

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID679
    KitDescFactory Optical Coin Drop

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5254 Machine Start Harness to the Coin connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID634
    KitDescDryer - Pulse
    step
    componentStart

    cci-readerinstall-kit
    KitID578
    KitDescWasher - Serial

    1. Connect the C-0127-MLV Machine Start Harness to the P23 connection on the Machine Control Assembly.

    Connect and Mount Reader

    ...

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer