Versions Compared

Version Old Version 4 New Version Current
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

cci-readerinstall-kitstep
KitIDcomponent617

  1. Connect the C-5213 Power Adapter Harness to the machine AC power terminals.

    1. For 120v models: L1, N, and Ground terminals.

    2. For 240v models: L1, L2, and Ground terminals.

  2. Connect the Black wire to the L1 tap.

  3. Connect the White wire to the N/L2 tap.

  4. Connect the Green/Yellow wire to the Ground tap.

  5. Connect the opposite end of the C-5213 Power Adapter Harness to the C-5602R1 Power Converter.

  6. Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

...

Mounting

Cci readerinstall step
componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6258 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent707KitDescCoin Drop: Factory
    Sense

    cci-readerinstall-kitstep
    KitID723
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    componentStart

    cci-readerinstall-kitstep
    KitID634
    KitDescPulse

    1. Connect the C-5254 Machine Start Harness to the P2 connection on the Machine Control Assembly.

    ...

    componentReader

    Cci readerinstall footer