Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to FasCard F2/F3 Reader Installation Guide - Front Mount for further instructions.
    cci-readerinstall-kitstep
    KitID980
    KitDescSurface Mounting

    Connect Machine Interface Harness

    componentMounting

    cci-readerinstall-kitstep
    KitID839
    KitDescMDB Harness
    1. Connect the C-6124-MDB Machine Start Harness to the MDB connection on the Machine Control Assembly or to the MDB harness connected to existing payment device.

    Connect and Mount Reader

    ...

    Feed remaining harness ends through the mounting hole as described in the FasCard F2/F3 Reader Installation Guide - Front Mount.

    ...

    Connect the black, 10-pin connection of the C-6124-MDB Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.

    ...

    Connect the clear, 3-pin connection of the C-6124-MDB Power Harness to port 1.

    ...

    componentStart

    Cci readerinstall step
    componentReader

    Cci readerinstall footer