Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID841
    KitDescCoin and Card

    Connect Power

    step
    componentMounting

    Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  • Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

  • Connect the C-5500-60 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID802

    Connect Coin Sense Harness

    step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6343 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent711KitDescCoin Drop: Phase 5
    Sense

    cci-readerinstall-kit
    KitID722
    KitDescCoin Drop: Phase 7

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID723
    KitDescCoin Drop: Imonex with EM100 Coin Multiplier

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6382 Coin Sense Harness to the 4-pin harness connected to the EM100 board.

    Connect Machine Interface Harness

    Connect the C-5344 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID652
    KitDescPulse - Phase 5
    step
    componentStart

    cci-readerinstall-kit
    KitID653
    KitDescPulse - Phase 7

    1. Connect the C-5345 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    ...

    step
    componentReader

    Cci readerinstall footer