| cci-readerinstall-kit |
|---|
| KitID | 851 |
|---|
| KitDesc | Card Only - Coin Ready |
|---|
|
Remove existing coin box.
Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.
Bend the side tabs of the C-6936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.
Attach the C-5414 F2 Mounting Bracket to the Coin Vault Bracket using C-0144 screws.| step |
|---|
|
|
| cci-readerinstall-kit |
|---|
| KitID | 846 |
|---|
| KitDesc | Card Only - Card Ready |
|---|
|
Install the C-6970R1 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.
Attach the C-5414 F2 Mounting Bracketto the C-6970R1 Alliance Mounting Bracket and secure using the C-1060 Screws.Refer to F2 FasCard Reader Mounting Guide for further instructions.
...
| cci-readerinstall-kitstep |
|---|
|
Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
...
...