Install Mounting Hardware
| cci-readerinstall-kitstep |
|---|
| KitIDcomponent | 598 |
|---|
| KitDesc | Coin Model - Metercase Mount |
|---|
| Remove the coin box and coin slide from the machine's meter case.
Attach the C-5414 Reader Bracket to the front of the C-6911 Meter Case Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.Insert the assembled C-6911 Meter Case Bracket into the front opening of the machine's meter case.
Secure the C-6911 Meter Case Bracket into place by attaching the C-0301 Mounting Bolt to the cage nut at the top of the C-6911 Meter Case Bracket from inside the meter case.
Connect Power
...
| Cci readerinstall kit |
|---|
|
Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.
|
Connect and Mount Reader
...
Feed remaining harness ends through the mounting hole.
...
Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...