Install Mounting Hardware
| cci-readerinstall-kitstep |
|---|
| KitIDcomponent | 598 |
|---|
| KitDesc | Card Only - Coin Model |
|---|
| Remove existing coin box and coin mechanism.
Run reader harnesses through the metercase and out the opening where the coin mechanism was mounted.
Attach the C-5414 Reader Bracket to the C-6911 Metercase Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.Insert the reader harnesses through the hole in the C-6911 Metercase Bracket and then insert the bracket into the metercase opening.
Secure the C-6911 Metercase Bracket to the metercase using the C-0301 Mounting Bolt.
Connect Power
Connect Coin Sense Harness
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
| KitID | 665 |
|---|
| KitDesc | Pulse - Coin Connection |
|---|
|
Connect the C-5371 Machine Start Harness to the P10 (Coin 1) connector on the Machine Control Assembly.
|
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | com.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
Feed remaining harness ends through the mounting hole.
...
Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...
(Coin and Card Installations Only) Connect the free end of the C-6362 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...