Page Comparison

Remove existing coin drop and coin box from the metercase.

Attach the C-5414 F2 Mounting Bracket to the C-6912 Metercase Bracket using (2) C-5420 10-32 x 1/4 Pan Screws.

Run the C-5500 Power Extension Harness and C-5355 Machine Start Harness through the metercase and then through the circular opening in the C-6912 Metercase Bracket.

Insert the assembled C-6912 Metercase Bracket into the metercase and secure from the inside using the C-1059 Keps Nuts.

Use the C-5101 Spade Taps on the incoming power.

1. Tap the black L1 wire.

2. Tap the white N wire.

3. Tap the green G wire.

Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:

1. Connect the blue wire to the black L1 wire.

2. Connect the brown wire to the white N wire.

3. Connect the green/yellow wire to the green G wire.

Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.

Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

Connect the C-5355 Machine Start Harness to the CN4 Payment Device Connection located inside the metercase.