Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

cci-readerinstall-kitstep
KitIDcomponent598
KitDescCard Only - Coin Models
  1. Remove the coin box and coin drop/slide from the machine's meter case.

  2. Attach the C-5414 Mounting Bracket to the C-6911 Meter Case Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.

  3. Insert the assembled C-6911 Meter Case Bracket into the front opening of the machine's meter case.

  4. Secure the C-6911 Meter Case Bracket into place by attaching the C-0301 Mounting Bolt to the cage nut at the top of the C-6911 Meter Case Bracket from inside the machine's meter case.

  5. After connecting all harnesses to the reader, use the (2) C-5416 8-32 x 3/8" Security Torx Screws to secure the reader to the C-5414 Mounting Bracket.

Connect Power

...

Mounting

Cci readerinstall step
componentPower

Cci readerinstall step
componentStart

Cci readerinstall kit
KitID665
KitDescPulse - Coin
  1. Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

...

Feed remaining harness ends through the mounting hole.

...

Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

...

Cci readerinstall step
componentReader

Cci readerinstall footer