Versions Compared

Version Old Version 4 New Version Current
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID584
    KitDescCoin and Card
    step
    componentMounting

    cci-readerinstall-kit
    KitID869
    KitDescCard Only - 40lb+ Models

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the (2) C-1059 10-32 Keps Nuts.

    ...

    step
    componentPower

    Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

    1. 120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.

    2. 240vac: Connect the brown and blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.

    3. Secure the green wire beneath the ground screw.

  • Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID595
    KitDescTap Source Machine Power

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID716
    KitDescFactory - Optical Coin Drop

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID655
    KitDescPulse - Coin
    step
    componentStart

    cci-readerinstall-kit
    KitID814
    KitDescSerial - Compass Control

    1. Connect the C-0126-MLV Machine Start Harness to the RS-232 port on the Machine Control Assembly.

    2. Connect the C-5359 Machine Start Harness to the Input 1 port on the Machine Control Assembly.

    ...

    step
    componentReader

    Cci readerinstall footer