Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

  • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kitstep
    KitIDcomponent980
    KitDescSurface Mount

    ...

    Mounting

    Cci readerinstall step
    componentPower

    Power is supplied through the same Machine Interface Harness described in step 4.

    ...

    Cci readerinstall step
    componentCoin Sense

    ...

    Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.

    Connect Machine Interface Harness

    cci-readerinstall-kit
    KitID839
    KitDescMDB Start Harness
    1. Connect the C-6124-MDB Machine Start Harness to the MDB connection on the Machine Control Assembly.

      1. Optional: Use the short pigtail MDB connection to reconnect any other payment devices still in use.

    Connect and Mount Reader

    ...

    Feed remaining harness ends through the mounting hole as described in the F2 Reader Mounting Guide.

    ...

    Connect the black, 10-pin connection of the C-6124-MDB Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.

    ...

    Connect the clear, 3-pin connection of the C-6124-MDB Power Harness to port 1.

    ...

    step
    componentStart

    Cci readerinstall step
    componentReader

    Cci readerinstall footer